110 VDC 50 Amp 110 VDC 50 Amp Neutral Relay with Limit Switch Cat. No. MT-45700-013 Weight 1 lbs	$54.00
12 Volt 100 amp White Rogers Relay 12 Volt 100 amp White Rogers Relay Cat. No. MT-120-901 Weight 1 lbs
200 amp white Rogers Reley 12 Volt and 48 Volt 200 amp white Rogers Reley Cat. No. MT-586-90 Weight 2 lbs
50 Amp EMS Display Panel Remote monitor panel displays a digital readout of the total amount of current being drawn by all the loads in the coach. Cat. No. MT-00-00684-100 Weight 1 lbs	$92.40
50A Smart EMS Upgrade Kit Model 760 There is no programming necessary and the unit will work with any load within the circuit breaker limits. The Smart EMS automatically “learns” the amount of current drawn by each of the controlled loads as it turns them on and off. Cat. No. MT00-00894-200 Weight 2 lbs
A.T.S. Timer Relay A.T.S. Timer Relay (Usage: Parallax (MagneTek) ATS, ATS 30 & ATS 100) Cat. No. MT-20516027 Weight 1 lbs	$24.00
Alternate Action Relay The Model 091-98-12 Alternate Action Relay is designed to remotely turn a load ON and OFF by grounding an input to the relay. Cat. No. 091-98-12 Weight 2 lbs	$62.00
Auto Interlock II The Auto Interlock II is a power transfer relay which automatically transfers the 120 volt A.C. from the shoreline to the auxiliary generator when the generator is started. Cat. No. 091-134 Weight 2 lbs
Auto Interlock III The Auto Interlock III is a power transfer relay which automatically transfers the 120 volt A.C. from the shoreline to the auxiliary generator when the generator is started. Cat. No. 091-134A Weight 2 lbs	$194.00
Auto Trol The Auto-Trol low frequency cutout relay is intended to protect A.C. loads by disconnecting them from the power source when the frequency of that power source drops below 60 Hz. Cat. No. 091-36-X Weight 2 lbs	$144.00
Capacitor .47 .47 Capacitor Usage : MagneTek 3200 & 6300 Series Cat. No. MT-17506201L Weight 1 lbs	$2.00
Capacitor 4, 6.9 & 10 MFD Usage: MagneTek, Triad-Utrad, Ferroresonant Cat. No. MT-17506 Weight 2 lbs
Capacitor 50,000 MFD 15 Volt DC Capacitor 50,000 MFD 15 Volt DC Usage MagneTek AC.DC distribution Panels Cat. No. MT-17506923 Weight 5 lbs	$39.60
Capacitor Simulated Battery Simulated Battery Usage to replace battery only when convert is on generato or shoeline power Cat. No. MT-SB-100 Weight 1 lbs	$82.50
Charger Board MagnetTek Charger Board MagnetTek Cat. No. MT-9150026 Weight 1 lbs	$24.00
Charger Board MagnetTek Q Charger Board MagnetTek Q Cat. No. MT-91068801-001 Weight 1 lbs	$38.00
Charger Board Progressve Dynamics Progressve Dynamics Charger Board 6 Pin Step Charger and PC Board (Usage: DPI Q Model Inear Converters) Cat. No. MT-PDIB Weight 1 lbs
DC Coil DPDT Relay 110 and 12 Volt DC Coil DPDT Relay Universal generator transfer Relay Cat. No. MT-102084 Weight 1 lbs
Diode 25 Amp PDI Diode 25 Amp PDI (Usage: MagneTek, Progressive Dynamics) Cat. No. MT-100715 Weight 1 lbs	$9.90
Diode 35 Amp Stud Mount Diode 35 Amp Stud Mount Cat. No. MT-SD35 Weight 1 lbs	$19.80
Diode 50 Amp 50 Amp Negative Diode (Usage: Triad-Utred, Ferroresonant) Positive (Usage: MagneTek, Ferroresonant & Linear) Cat. No. MT-M915001 Weight 1 lbs	$11.00
Diode 6 Amp 200 Volt Diode 6 Amp 200 Volt (Usage: MagenTek, PDI) Cat. No. MT-18508028 Weight 1 lbs	$5.50
Diode Bridge for ATS Diode Bridge for ATS (usage : MagneTek ATS, ATS 30 and ATS 100 Cat. No. MT-91500018 Weight 1 lbs	$11.00
Diode Bridge Time Delay Diode Bridge Time Delay (Usage: Todd /Iota TS-30, TS-50, PS245L, PS 2455, PS 2-245S Cat. No. MT-DIOD Weight 1 lbs	$41.80
DPDT 30A Relays These double-pole, double-throw relays can be used for up to 30 amps at 12 or 24 volts DC or 250 volts AC. Cat. No. AEE-53.82 Weight 1 lbs
Intellitec's Transfer Relay Delays There are two models of Transfer Relay Delays. One model is capable of carrying up to 15 amps of current. The other model is capable of carrying up to 30 amps. Both of these units have both UL and CSA recognition. Cat. No. MT-IN-TRD Weight 2 lbs
Intellitec.s Smart Energy Management System Intellitec.s Smart Energy Management System (Smart EMS) is designed to be used in RVs equipped with 30 Amp power cords. Cat. No. MT-00-00683-000 Weight 2 lbs	$406.00
Load Manager The LOAD MANAGER is a precision solid state controller which sequentially switches ON seven relays at 1/2 second intervals. Individual switches, which the user may install, can select a combination of outputs. Cat. No. 091-32 Weight 2 lbs	$257.00
Load Manager 1H The LOAD MANAGER 1H is a small economical assembly that monitors a D.C. voltage and operates a relay when the voltage drops below its set point. Cat. No. 091-96- Weight 2 lbs	$69.00
Load Manager 2 The LOAD MANAGER 2 is a simple, compact assembly for installation in applications that require the shedding of only 2 loads. Cat. No. 091-79 Weight 2 lbs	$111.00
Load Manager P The Load Manager P is a precision low voltage disconnect designed to shut down a radio or computer to prevent complete discharge of a vehicle's battery. Cat. No. 091-141 Weight 2 lbs	$98.00
Potted Bridge Potted Bridge (Usage: DPI Q Series Linear Converters) Cat. No. MT-802941 Weight 1 lbs	$41.80
Relay 6 and 12 Volt Relays Cat. No. MT-20516599	$11.00
Resistor .11 Ohm Limit .11 Ohm Limit Resistor (Usage: Progressive Dynamics) Cat. No. MT-104273 Weight 1 lbs	$13.20
Resistor .250 Ohm .250 Ohm Resistor (Usage: BW Phillips Series, Progressive Dynamics, Inc.) Cat. No. MT-104273 Weight 1 lbs	$11.00
Resistor .3 Ohm 30 Watt .3 Ohm 30 Watt Resistor (Usage: MagneTek 3200 Series) Cat. No. MT--16506517 Weight 1 lbs	$11.00
Resistor 50 Watt MagneTek 6300 Series Cat. No. MT-165067 Weight 1 lbs	$11.00
SCR 25 Amp Stud Mount SCR 25 Amp Stud Mount (Usage: Parallax MagneTek, Progressive Dynamics, B W Phillips) Cat. No. MT-100768 Weight 1 lbs	$19.80
SCR 25 and 40 amp Usage: magnetTek 6300 & 3200 Serices, 6300 CC Option & Q models Cat. No. MT-SCR Weight 1 lbs	$11.00
SPDT 12 Volt Relay Usagae: Progressive Dynamics, MagneTek, Universal replacement rated 50 amps Plus DC Cat. No. MT-101245 Weight 1 lbs	$41.80
SPDT 12V 40A Relay These single-pole, double-throw 40 amp enclosed relays are widely used in the automotive industry. Wires may be attached with 1/4" quick connect terminals or the relay socket below may be used. Nominal operating current is 140mA. Relay socket has 2 feet Cat. No. AEE-53.8290 Weight 1 lbs	$8.00
SPDT Relay Socket for 40 Amp Relay SPDT Relay Socket for 40 Amp Relay Cat. No. AEE-53.8291 Weight 1 lbs	$4.00
SPST N.O. 12V 75A Relay This enclosed single-pole, single-throw relay has one set of contacts that close when power is applied to the coil terminals. It can be used to turn on 12 volt loads of up to 75 amps. Cat. No. AEE-53.8293 Weight 1 lbs	$18.00
Time Delay Board Time Delay Board Todd Engineering PS-250 Opta ITS-50C Lyght Power PTime Delay Board LPT50CA Cat. No. MT-TDB Weight 1 lbs	$41.80
Timer Delay Relay Timer Delay Relay (Usage: Progressive Dynamics generator transfer switch options) Cat. No. MT-802943 Weight 1 lbs	$41.80