Pole Mounted Battery Enclosures Non-Insulated Cat. No. DPW-PMBE-NI Weight 15 lbs

Non-Insulated Pole Mounted Enclosures HINGE COVER The hinge cover enclosures are manufactured for the most common battery sizes made by Concorde and Deka (MK); other manufacturers make similar sized batteries but they are not listed. Each enclosure has a removable controller mounting plate. Louvers are punched on the two sides - low on one side and high on the opposite side to promote convective flow through the enclosure. The boxes have a stainless steel padlock hasp and two 7/8” diameter conduit entries for 1/2” conduit fittings. Two U-bolts are provided with each enclosure. Enclosure sizes other than those listed below are also available. Features and Specifications DESIGN Keeping with our reputation for providing tough products our battery enclosure line is no exception. All POWER-FAB battery enclosures manufactured by Direct Power and Water Corporation are built to high standards to provide a rugged, high quality product. Standard enclosures are available in two basic types: a front opening Pole Mount and a Chest-Style pad mount. The Pole Mounts are available in screw cover and hinge cover designs. The screw cover enclosures are produced in single and dual battery designs. These hold the Group 27 and Group 30 case sizes; they also accomodate various Concorde batteries. All standard hinge cover pole mount enclosures are manufactured for the Deka (MK Battery), Concorde, and 220 AH/6-volt “golf-cart” type batteries. CONSTRUCTION Standard enclosures are manufactured with .125” 5052-H32 aluminum. All die marks and welds are sanded smooth. and finished with a reflective bright white polyester powder coat. This finish provides a highly reflective surface to minimize internal heat gain. All enclosures are provided with integrated louvers located low on one side and high on the opposite side to promote convective air flow through the enclosure to reduce internal temperatures and remove gasses. Filters are located over the louvers to keep out dust and insects. The filters are removable for cleaning or replacement. NEMA STANDARDS All standard enclosures are built to meet NEMA 3R specifications. Enclosures are available in NEMA 4 and NEMA 4X for certain situations. WARRANTY All battery/equipment enclosures are provided with a limited five year warranty. STANDARD FEATURES • .125” 5052-H32 aluminum • White polyester powder coat finish • NEMA 3R design •Tamper-resistant padlock hasp • Two 1/2” electrical conduit holes • Stainless steel continuous hinge • Removable control mounting plate • Screened/filtered louvers Number of Batteries Brand of Batteries Model of Batteries Non-Insulated Dimensions DxWxH 1 CONCORDE PVX-1080T 9x16x20 2 CONCORDE PVX-1080T 16x16x20 4 CONCORDE PVX-1080T 16x16x34 6 CONCORDE PVX-1080T 16x25x34 1 CONCORDE PVX-2120L 12x24x22 2 CONCORDE PVX-2120L 12x24x36 1 CONCORDE PVX-2580L 15x24x22 2 CONCORDE PVX-2580L 15x24x36 2 CONCORDE PVX-2160T** 16x16x20 4 CONCORDE PVX-2160T** 16x16x34 1 DEKA 8G30H*** 9x16x20 2 DEKA 8G30H*** 16x16x20 4 DEKA 8G30H*** 16x16x34 6 DEKA 8G30H*** 16x25x34 1 DEKA 8G4D 12x24x22 2 DEKA 8G4D 12x24x36 1 DEKA 8G8D 15x24x22 2 DEKA 8G8D 15x24x36 2 GENERIC 6V/220 AH 14x18x22 Sizes: 9x16x20 : $545.00 16x16x20 : $725.00 16x16x34 : $925.00 16x25x34 : $695.00 12x24x22 : $910.00 12x24x36 : $760.00 15x24x36 : $995.00 14x18x22 : $600.00