|
|
Home: EcoVantage Catalog: Batteries: Battery Box's:
Pole Mounted Battery Enclosures Insulated
Cat. No. DPW-PMB-I
Weight 15 lbs | |
Pole Mounted Insulated Enclosures
HINGE COVER
The hinge cover enclosures are manufactured for the most common battery
sizes made by Concorde and Deka (MK); other manufacturers make similar
sized batteries but they are not listed. Each enclosure has a removable
controller mounting plate. Louvers are punched on the two sides - low
on one side and high on the opposite side to promote convective flow
through the enclosure. The boxes have a stainless steel padlock hasp
and two 7/8 diameter conduit entries for 1/2 conduit fittings. Two
U-bolts are provided with each enclosure. Enclosure sizes other than
those listed below are also available.
Features and Specifications
DESIGN
Keeping with our reputation for providing tough products our battery
enclosure line is no exception. All POWER-FAB battery enclosures
manufactured by Direct Power and Water Corporation are built to high
standards to provide a rugged, high quality product. Standard
enclosures are available in two basic types: a front opening Pole Mount
and a Chest-Style pad mount.
The Pole Mounts are available in screw cover and hinge cover designs.
The screw cover enclosures are produced in single and dual battery
designs. These hold the Group 27 and Group 30 case sizes; they also
accomodate various Concorde batteries.
All standard hinge cover pole mount enclosures are manufactured for the
Deka (MK Battery), Concorde, and 220 AH/6-volt golf-cart type
batteries.
CONSTRUCTION
Standard enclosures are manufactured with .125 5052-H32 aluminum. All
die marks and welds are sanded smooth. and finished with a reflective
bright white polyester powder coat. This finish provides a highly
reflective surface to minimize internal heat gain.
All enclosures are provided with integrated louvers located low on one
side and high on the opposite side to promote convective air flow
through the enclosure to reduce internal temperatures and remove
gasses. Filters are located over the louvers to keep out dust and
insects. The filters are removable for cleaning or replacement.
NEMA STANDARDS
All standard enclosures are built to meet NEMA 3R specifications.
Enclosures are available in NEMA 4 and NEMA 4X for certain situations.
WARRANTY
All battery/equipment enclosures are provided with a limited five year
warranty.
| STANDARD
FEATURES |
.125 5052-H32 aluminum
White polyester powder coat finish
NEMA 3R design
Tamper-resistant padlock hasp |
Two 1/2 electrical conduit
holes
Stainless steel continuous hinge
Removable control mounting plate
Screened/filtered louvers
|
OPTIONAL
FEATURES
|
Hot dip galvanizing
12 gauge steel
14 gauge steel
Rigid polystyrene insulation
Stainless steel construction
|
Control mounting plate
Separate electronics compartments
Integrated PV module mounts
Carrrying handles
Active heating/cooling equipment
|
Number
of
Batteries
|
Brand
of
Batteries
|
Model
of
Batteries
|
Insulated |
| Dimensions DxWxH |
| 1 |
CONCORDE |
PVX-1080T |
11x18x22 |
| 2 |
CONCORDE |
PVX-1080T |
18x18x22 |
| 4 |
CONCORDE |
PVX-1080T |
18x18x36 |
| 6 |
CONCORDE |
PVX-1080T |
18x27x36 |
| 1 |
CONCORDE |
PVX-2120L |
14x26x24 |
| 2 |
CONCORDE |
PVX-2120L |
14x26x38 |
| 1 |
CONCORDE |
PVX-2580L |
17x26x24 |
| 2 |
CONCORDE |
PVX-2580L |
15x26x38 |
| 2 |
CONCORDE |
PVX-2160T** |
18x18x22 |
| 4 |
CONCORDE |
PVX-2160T** |
18x18x36 |
| 1 |
DEKA |
8G30H*** |
11x18x22 |
| 2 |
DEKA |
8G30H*** |
18x18x22 |
| 4 |
DEKA |
8G30H*** |
18x18x36 |
| 6 |
DEKA |
8G30H*** |
18x27x36 |
| 1 |
DEKA |
8G4D |
14x26x24 |
| 2 |
DEKA |
8G4D |
14x26x38 |
| 1 |
DEKA |
8G8D |
17x26x24 |
| 2 |
DEKA |
8G8D |
15x26x38 |
| 2 |
GENERIC |
6V/220 AH |
16x20x24 |
|
|
|
|
