CX10, CX20, CX40
Solar Charge Regulator with LC Display
- Battery State-of-Charge display LCD
- Charge and discharge status display
- Acoustic load disconnect pre-warning
- Load status indication
- Choose between 3 load disconnect algorithms
boost/absorption/float
- PWM-regulation
(series type)
- Prepared for DIN rail mounting
- Automatic 12 / 24 Volt detection
- Integrated temperature compensation
- Covered terminals (up to 16mm² wire
size)
- Full solid-state protection
- Programmable nightlight function
The
CX series is a sophisticated solar charge regulator family with
exceptional features in this price range. Beside a perfect PWM
regulation with integrated temperature compensation the controllers
provide extraordinary display-, programming- and safety functions. The
battery state of charge is clearly displayed with a bar chart, as well
as energy flows from and to the battery and the load status (e.g.
overload, load short circuit). The deep discharge protection function
can be set up to three different modes: voltage controlled, SOC
controlled or adaptive (fuzzy logic).
Acoustic warnings are built in, as well as a programmable nightlight
function.
The CX also provides a built-in excess energy management function which
means that in combination with especially designed loads (e.g. Phocos
Solar Refrigerators/Coolers SF32E, SF50E) it is possible to make use of
excess energy which would be lost otherwise because of the overcharge
protection of the battery. A better utilization of the solar system is
the benefit.
The compact case design is prepared for DIN rail mounting (mounting
device available as an accessory).
|
|
CX10 |
|
CX20 |
|
CX40 |
| Charge current max. |
|
10 A |
|
20 A |
|
40 A |
| Load current max. |
|
10 A |
|
20 A |
|
40 A |
| System voltage |
|
12/24 V |
|
12/24 V |
|
12/24 V |
| Self power consumption |
|
< 4 mA |
|
< 4 mA |
|
< 4 mA |
| Dimensions (wxhxd) |
|
89x90x39 mm |
|
89x90x39 mm |
|
89x90x39 mm |
| Type of protection |
|
IP20 |
|
IP20 |
|
IP20 |
