The Saf-T Vent EZ Seal factory-built Special Gas Vent and
Gas Vent Connector is Tested and Listed by Underwriters Laboratories to
UL 1738/ULC S636 and is for use with Listed natural gas or propane
burning equipment that produce flue-gas temperatures not above
550°F. Some applications have lower maximum temperatures. The
system is to be installed and sealed per the manufacturers'
instructions so all joints are gas tight, preventing leakage of
products of combustion into a building.
The
Saf-T Vent EZ Seal system is fabricated from AL 29-4C® stainless
steel, which is highly suited for use with high efficiency gas burning
equipment, which produce excessive amounts of condensation in the vent.
|
3" Diameter
|
| Elbows |
| Degree |
Part No. |
Description |
| 15 |
9309 |
3"-15 DEG ELBOW, SAF-T VENT
EZ |
| 30 |
9310 |
3"- 30 DEG ELBOW, SAF-T
VENT EZ |
| 45 |
9311 |
3"- 45 DEG ELBOW, SAF-T
VENT EZ |
| 70 |
9312 |
3"- 70 DEG ELBOW, SAF-T
VENT EZ |
| 90 |
9314 |
3"- 90 DEG TR ELBOW, SAF-T
VENT EZ |
| 90 |
931 4LR |
3"- 90 DEG LR ELBOW, SAF-T
VENT EZ |
