ACT-202-BTW
How 
Works
The 
valve is installed under the sink
farthest from the water heater where hot water takes the longest time
to arrive. No electrical outlet is required. When the hot water supply
line becomes cool, the adjustable thermostatic valve allows the cool
water in the hot water supply line to flow into the cold water supply
line, replacing it with hot water. The pump is installed at the
water heater and controlled by a timer which can be set to family usage
requirements. Hot water will also be instantly available at all
other faucets located on the hot water supply line between the water
heater and the faucet
where the valve is installed.
The Instant Hot Water Pump and Valve System...
- does not require a return line.
- requires only 25 watts of power.
- comes complete with a 10 ft. long power cord.
- requires only one pump and one valve installation for
- all fixtures on the hot water plumbing line.
- can be used with multiple valves for applications with
branch plumbing.
- pump installs at the water heater and valve installs under
the sink.
- has adjustable thermostat.
- saves the average family of four up to 17,000 gallons of
water annually.
- saves energy, money, water and pays for itself in a short
period of time.
- is silent during operation.
- has a built-in 24 hour timer which allows the selection of
system operating periods to suit family usage.
Typical System Layout
Questions & Answers:
Common
Questions & Answers About The Autocirc System
Instruction Manual:
Instruction Manual (564 KB)
