Model
# 091-168-12
50
Ampere Output
1 Hour Auto Equalize for Faster
Recharge
Patented Charging Wire
Resistance Compensation
Remote Voltage & Current Bar
Graph Display
Diagnostic for Poor Connections
& Overheating
High
Voltage & High
Temperature Protection
Low Output Indicator
Aural Malfunction Indicator
The
Auto Charge SD 150 is a state of the art, high output battery charger
that provides a rapid recharge for an emergency vehicle's battery. A
special equalizing circuit raises the charger's output voltage for 1
hour when the charger is turned on. This reduces the time required to
charge the battery and helps rejuvenate the battery's plates. At the
conclusion of the equalize period the output switches to the normal
float charge mode. The patented "sample and hold" circuit precisely
measures the battery voltage eliminating errors due to voltage drop in
charging wires.
A
series of diagnostics continually checks the operation of the charger.
LED's indicate normal and abnormal operation. Excessive output voltage
is detected, as are insufficient output, high temperature and high
resistance connections. An LED also indicates when the battery is
disconnected. The remote indicator is a dual bar graph indicating both
charger voltage and output current.
Specifications:
Input:
115 volts, 50/60 Hz,
15 amperes
Charger Output: 12 Volts,
D.C., Output Current: 50 amperes maximum
Voltage Sense: Remote,
electronic, no sense wires required
Indicators: Power, Battery
Connected, Equalize, Hi Resist, Hi Temp, Hi Volt, Low Volt, Shutdown
Low Volt/Low Current, and
Fan
Battery Saver Overload Indicator:
Indicates Battery Saver load exceeds 3 amperes.
Charger Output Indicator:
Remotely located bar graph display, indicates voltage and current of
battery.
Weight: 28 lbs
Warranty: 3 Years
Outline
Drawing
Instruction Manual
(.pdf file, 170Kb)
