Automatically Charges
Battery Provisions for
Charging 10 Vehicles Can Not Over Charge
Battery All Batteries
Isolated Ammeter
Indicates Total Charger Output Digital
Voltmeter, A Selector Switch Permits Operator to View Voltage of Each
Vehicle
The Auto Charge 10 is
designed specifically for those who demand the ultimate in an automatic
battery charging system. Built in modular fashion so that it can be
configured for applications with as few as 3 vehicles or as many as 10
vehicles, the Auto Charge 10 permits monitoring of the voltage of all
the vehicles from one central location. Individual charge indicators on
each module indicate the current flowing to each vehicle. Central charging systems
often have difficulty with
different line lengths between the charger and the vehicle. Thus, the
battery in the remote vehicle does not receive sufficient charge. The
Auto Charge 10 charges all batteries precisely and equally, regardless
of line length. Each module in the charger is an individual charger
control dedicated to one vehicle. Each module is connected to the
vehicle it charges by 4 wires. Two wires carry the charging current,
the other two sense the battery voltage. The control circuit in the
charging module adjusts the output voltage to obtain the correct
voltage at the battery, thus compensating for line voltage drops.
A digital voltmeter
on the master panel permits an operator
to monitor the voltage of each vehicle. Most installations of
the Auto Charge 10 are made to locate
it in a dispatcher's area or some central location to facilitate
monitoring of the voltage and charging rate of the vehicles.
Specifications: Input: 120
volts 50/60Hz, 15 amps
Output: for 12V batteries
Output Current: 0-10 amps per module
Charge Indicator:
0-15 amps meter, 1 per module
Weight: 120 lbs
Warranty: 3
Years
Automatically Charges
Battery