SunWize® Power Stations Cat. No. SWI-PW Weight 100 lbs

SunWize® Power Stations SunWize Power Stations are complete, integrated solar power systems designed for site loads requiring 12/24/48 Vdc or 110V-240V, 50 Hz/60 Hz AC voltage. Wired to NEC standards, each Power Station provides safe and reliable power without the expense of installing utility power. The solar array tilt is easily adjustable to maximize solar energy output. The systems are mounted on galvanized steel structures or trailers engineered to withstand harsh environments and high wind loads. SunWize Power Stations provide continuous DC power with battery backup from a DC source. These fully-integrated, galvanized units use DC primary power to charge a 12, 24 or 48 Vdc sealed battery bank while powering the DC load, or AC load with integral inverter option. Features and benefits Solar modules are fully encapsulated to resist harsh weather conditions Stand-alone or hybrid systems Self-supporting, ballasted design requires no foundation NEC code compliant overcurrent protection and safety disconnect Adjustable array maximizes power output Corrosion resistant control/battery enclosure Installation, operation & maintenance documentation Pre-assembled and factory tested for easy installation Clean, renewable energy provides low environmental impact Factory testing for quality assurance Low maintenance and operating costs Complete systems reduce specifying and buying time Quality components assure long system life Reliable, continuous power Shipping and Handling - Power Stations are fully assembled for factory testing before shipment and then partially disassembled for shipping depending upon customer requirements. For easy assembly in the field, the battery box and prewired control box are shipped together. Warranty - SunWize Power Stations carry a one-year system warranty for materials and workmanship. The solar modules have a 25-year warranty. Careful component selection results in a system with a lifetime exceeding 25 years with battery replacements every five to ten years. Power Station is used to power a Microwave Repeater Site. Model Discription PS960-24-1220-T-S01-WG-LM01 Power Station 960Wp Array, S01-Small Galv. Structure, 24 Vdc, 1220AH AGM bat, White Powder Coat Alum. Chest Encl. w/ Local Metering PS1380-48-840-T-M01-WG-LM01 Power Station 1380Wp Array, M01-Medium Galv Structure, 48Vdc, 840AH GEL bat, White Powder Coat Alum. Chest Encl. w/ Local Metering PS1840-24-2160-FM01-PG-LM01 Power Station 1840Wp Array, M01-Medium Galv Structure, 24Vdc, 2160AH AGM bat, White Powder Coat Steel Hinged Door Encl. w/ Local Metering PS2400-48-1220-TM01-WG-LM01 Power Station 2400Wp Array, M01-Medium Galv Structure, 48Vdc, 1220AH AGM bat, White Powder Coat Alum. Chest Encl. w/ Local Metering PS2760-48-1220-TM01-WG-LM01 Power Station 2760Wp Array, M01-Medium Galv Structure, 48Vdc, 1220AH AGM bat, White Powder Coat Alum. Chest Encl. w/ Local Metering PS3000-48-1220-T-L01-WG-LM01RM01 Power Station 3000Wp Array, L01-Large Galv Structure 48 Vdc, 1220AH AGM bat, White Powder Coat Alum. Chest Encl. w/ Local Metering, SunWize SNMP/RS232 Remote Monitoring PS3600-48-1220-T-L01-WG-LM01RM01 Power Station 3600 Wp Array, L01-Large Galv Structure 48 Vdc, 1220 AH AGM bat, White Powder Coat Alum. Chest Encl. w/ Local Metering, SunWize SNMP/RS232 Remote Monitoring Model: PS960-24-1220-T-S01-WG-LM01 : $28,394.00 PS1380-48-840-T-M01- WG-LM01 : $43,249.00 PS1840-24-2160-FM01-PG-LM01 : $56,380.00 PS2400-48-1220-TM01-WG-LM01 : $56,373.00 PS2760-48-1220-TM01-WG-LM01 : $61,183.00 PS3000-48-1220-T-L01-WG-LM01RM01 : $65,043.00 PS3600-48-1220-T-L01-WG-LM01RM01 : $71,928.00