Home
EcoVantage Catalog
Contact
Policies
Mission
Search:


Home: EcoVantage Catalog: Appliances: Heaters:

Empire DV-210-SG/DV-215-SG Direct-Vent Wall Furnaces
Cat. No. SLE-DV-210-SG
Weight 42 lbs

With Direct Vent heaters, there is a difference in fuel economy because outside air is used to support combustion. Inside air is warmed as it re-circulates around a sealed combustion chamber, and this warm air heats the room. Empire’s Direct Vent units are ideal where existing flues or chimneys cannot be used. Just one hole through an outside wall is all you need. If you must vent, you will receive maximum fuel economy from Direct Vent heaters.

Empire’s secret to quieter operation is our uniquely designed burner. As gas enters the burner port, it is ignited immediately, which eliminates delayed ignition noise and gives you quieter operation.
Clean, smart engineering on the inside also calls for clean, smart looks on the outside. The simple Direct Vent cap on the exterior of your home projects only 5". And, with the option of the vinyl siding kit, installation on virtually any type of home is possible.
The millivolt wall thermostat, requiring no electricity, provides reliable round-the-clock comfort.
Model DV-210-SG DV-215-SG
Color: Cabinet and Front Panel Beige Beige
Btu Input 10,000 15,000
Overall Dimensions
Width 20 1/4"
Depth 9 3/8"
Height 21 3/8" 24 7/8"
Shipping Weight, Lbs. (One Carton 42 60
Temperature Control
Millivolt Wall Thermostat with Yes Yes
Positive Off

Accessories (State on Order)

Blower Kit DVB-1 DVB-1
Output, Cu. Ft./Min. 60 60
Vinyl Siding Vent Kit DV-822 DV-822
Vent Tube Extension Kit (Fits wall from 13" to 19") * *

Minimum Clearances to Combustion from:
Top 12" 12"
Each Side 1" 1"
Bottom of Unit to Floor Covering 0 0
Gas Inlet
Type of Gas (State on Order) Natural or LP Natural or LP
Iron Pipe Size (N.P.T.) 1/2" 1/2"
Wall to Valve Inlet 6 3/16" 6 3/16"
Right Side to Valve Inlet 6 7/8" 6 7/8"
Center of Vent to Valve Inlet N/A N/A
Valve Inlet to Floor Covering 2 11/16" 2 11/16"
Venting
Wall Depth Minimum 4 1/2" 4 1/2"
Wall Depth Maximum 13" 13"
Vent Opening in Wall 6 1/4" Dia. 6 1/4" Dia.
Center of Vent to Nearest 16" 16"
Outside Corner of Building or Obstruction
Center of Vent from any Opening through 9" 9"
which Flue Gases could enter a Building

Bottom of Vent above Grade 12" 12"
Edge of Vent to Nearest 6" 6"
Projecting Surface
Vent Projection from Outside Wall 4" 4"
Center of Flue to Floor Covering 15 7/8" 19 3/8"



Safety Control
Pilot and Main Burners Include Automatic Shut-off.

Warranty
Combustion chamber carries a 10-year warranty.
All other parts carry a 1-year limited warranty.
* Vent Tube Extension Kit Available. Please Contact Empire Parts Department.
This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by state or local codes.

Gas:

Model:

Option:

Option 1:


 Created by WebCatalog Creator





© EcoVantage Energy IncAll rights reserved