AC/DC Distribution Panel and
Inteli-Power Converter with Charge Wizard
Inteli-Power AC Features:
- Accepts up to 7 branch circuit breakers when using split
breakers.
- AC Panel features 12 built-in push and lock strain relief wiring
connectors for quick installation. Saves over 50% on installation cost.
- Vertical or horizontal mounting choices.
- Attractive light weight panel design made from impact-resistant
high temperature polymers.
- Note: 30 AMP main breaker and AC breakers are not included and
shown for reference only.
Covered by one or more of the following patents: 5,687,066
5,600,550 5,982,643 6,184,649 6,424,520 - One or more additional
patents pending.
Inteli-Power DC Features:
- Top two fuse holders recommended for low current devices such as
smoke detectors and carbon monoxide detectors.
- 12 Branch fuse holders with maximum rating of 20 AMPS each.
- Optional L.E.D. indicators identify which fuse is blown.
- Converter/Charger section is accessible from the front.
- Converter/Charger ratings of 45 and 60 AMP.
- Easy access reverse battery protection fuses.
- Optional DC Ground Buss can be user-installed in the DC wiring
compartment.
Other PD4300 Series Features:
- Reverse battery
protection
- Electronic current
limiting
- Low line voltage
protection
- Intelligent cooling
fan
- High voltage
protection
- Automatic thermal
protection
- Press open door for
easy access to circuit breakers
- Front access to large
wiring compartment
Housing Features:
- Snap lock cover stays shut while
traveling. Opens with a touch.
- Attractive design with fine
textured finish.
- Special formulation plastic is
very durable and engineered for use in higher temperature applications.
Inteli-Power 4300 Series models can
recharge the battery to 90% in 2-3 hours using our patented Charge
Wizard technology.
- The built-in
Charge Wizard automatically selects one of four operating modes: BOOST,
NORMAL, STORAGE, DESULFATION.
- BOOST Mode 14.4
Volts - Rapidly brings RV battery up to 90% of full charge. In the
BOOST mode the Charge Wizard status indicator stays on.
- NORMAL Mode 13.6
Volts - Safely completes the charge. In the NORMAL mode the Charge
Wizard status indicator flashes once every second.
- STORAGE Mode
13.2 Volts - Maintains charge with minimal gassing or water loss. In
the STORAGE mode the Charge Wizard status indicator flashes once every
8 seconds.
- DESULFATION Mode
14.4 Volts every 21 hours for a period of 15 minutes to prevent battery
stratification. In the DESULFATION mode the Charge Wizard status
indicator stays on.
PD4300 Inteli-Power Panel Specifications Table
| |
PD4345 |
PD4360 |
| Maximum
DC Output Current |
45-AMPS |
60-AMPS |
| Maximum Continuous Input
Power |
725 WATTS |
1,000
WATTS |
| No Load
DC Output Voltage |
13.6 VDC |
13.6 VDC |
| No Load Voltage Tolerance |
+/- .3 VDC |
+/- .3 VDC |
| Full
Load Output Voltage |
> 12.6 VDC |
> 12.6 VDC |
| Ripple and Noise Voltage |
<50 MV
RMS |
<50 MV
RMS |
| Input
Voltage Tolerance |
105 - 130 VAC |
105 - 130 VAC |
| Input Voltage Frequency |
50-60 HZ
|
50-60 HZ
|
| Peak
Inrush Current |
32-AMPS |
47-AMPS |
| Efficiency (Typical) |
> 80% |
> 80% |
| Reverse
Battery Protection |
YES |
YES |
| Electronic Current
Limiting |
YES |
YES |
| Cooling
Fan |
Auto-variable speed |
Auto-variable speed |
| Back Up Thermal
Protection |
YES |
YES |
| Full Function
Charge Wizard |
YES |
YES |
| Storage Temperature |
20-80C |
20-80C |
|
Operating Temperature |
0-50C |
0-50C |
| Hipot Voltage
Test |
<-------- 1240 V @ INPUT
TERMINALS --------> |
| Over
Voltage Protection |
YES |
YES |
| Under
Voltage Protection |
YES |
YES |
| Weight |
10 LBS. |
10 LBS. |
| Cutout Size |
10.125W x 13.25H |
10.125W x 13.25H |
|
Dimensions |
11.85W x 14.125H x 8.5D |
11.85W x 14.125H x 8.5D |
| UL & c UL Listed |
YES |
YES |
| |
|
|
| AC Distribution
Specs: |
|
|
|
Rating |
120 VAC/30 AMPS |
120 VAC/30 AMPS |
| Breakers |
Max. 30 AMP Main... Up to 7
Branch Circuits |
| |
|
|
| DC Distribution
Specs: |
|
|
|
DC Fuse Positions |
12/18 |
12/18 |
| Blown Fuse
Indicators |
Optional |
Optional |
|
Ground Bar |
Optional |
Optional |
|
*Retail and
OEM Part Numbers will be determined by your selected options when you
place your order.
View the PD4300 Series Power Control Center
Installation & Operation Guide
