Power
Transfer
MODEL
# ES50-VOLT-SURGE 240VAC 50 AMPS/POLE
65 AMP NEUTRAL
Automatic
Transfer Switch
Automatically
switches from power cord to generator
- Heavy
duty contactor assembly specifically designed for rigorous use, will
handle 50 AMP power cord and up to 12kw generator
- Transfers
both hot and neutral legs simultaneously
- Utilizes
two auxillary switches in combination with a mechanical interlock to
ensure power cord is off before generator is on
- Comes
standard with the capability of monitoring voltages on the generator
and shore line
- Built-in
time delay allows generator to get up to speed
- Built-in
surge protection against voltage spikes and transient voltages
- Quick
and easy installation
- Designed
for oem and aftermarket applications
The
ES50-VOLT-SURGE is intended for use as an electrical transfer switch to
automatically switch multiple sources (from one to another), i.e.
switching from shoreline to generator power.
The
ES50-VOLT-SURGE is primarily designed for installation in conjunction
with a generator
having a rated output no larger than 12KW, an external power cord
having a rated output no larger than 2 pole, 240VAC, 50A, 1PH, 60HZ .
CONTACTORS:
3 pole N.O. 240 VAC, 50 Amps/Pole
COIL: 110VAC (60H, Inrush Current - 77 Watts,
Sealed - 4.0 Watts)
AUXILIARY SWITCHES: One shoreline and one
generator release switch, 120VAC, N.C.
PHYSICAL SIZE: 8” x 9” x 4-7/8”
KNOCKOUTS: Assorted
TIME DELAY: Custom time delay, 30 seconds
nominal, generator low voltage monitoring
WEIGHT: 13 lbs
UNIT
ALSO AVAILABLE WITHOUT SURGE PROTECTION. WHEN ORDERING, USE PART #
ES50-VOLT.
Cautions:
- install
vertically or horizontally in a dry, accessible area
consult factory before drilling metal case
- keep
covered except during wiring as contactors are sensitve to dust and
debris
- when
hi-potting coach, disconnect es50-volt-surge or hi-pot on load side of
switch. This unit has been hi-potted to ul standards at the factory
WARRANTY: Elkhart Supply
Corporation warrants that this product shall be free from defects in
material and workmanship for one year (twelve months) from date of
purchase or eighteen months after date of manufacture, whichever is
less. If, after our inspection, a defect is revealed, the unit will be
repaired and returned, at our discretion. We will accept up to 1/2 hour
(30 minutes) labor for the unit to be changed out or $18.00, whichever
is less. This warranty shall not apply to any product that shows
evidence of neglect, misuse, improper installation, or that has been
repaired or altered by any other party other than this company. Proof
of purchase may be required.
