|
|
Home: EcoVantage Catalog: Solar Mounts: Trackers:
Wattsun Tracker (KD135)
Cat. No. 051TRKRKD135
Weight 101 lbs | |
Wattsun Active Trackers track the sun
from east to west using electronic sensors and motor or actuator
drives.
During partly cloudy conditions, the tracker fixes on the
brightes
area of the sky capturing the maximum amount of sunlight available.
At
night it returns to the morning sunrise position, ready to start
tracking
when the sun rises again.
Azimuth trackers automatically track the sun's path by rotating the PV
array around the pipe, providing greater stability for large
arrays. Wattsun's azimuth trackers provide nearly 270 degrees of
rotational movement and can adjust from 5 to 75 degrees of elevation
tilt.
The AZ-125 gear drive , azimuth tracker comes standard as a single-axis
tracker witn manual seasonal tilt adjustment . It is powered by a
24VDC
drive motor running a quality worm and gear drive . With the
addition
of the dual-axis option (order separetly), the AZ-125 can capture
virtually
all the available power the sun delivers.
The AZ-225 gear-drive, azimuth tracker is for very large arrays.
It can hold over 2kW of solar modules. It is powered by a
24VDC motor running a heavy-duty ball bearing/ worm gear drive.
It comes standard with the dual-axis opion, enabling it to capture the
maximum amount of solar energy.
If your system voltage is not 24VDC, you will need a Wattsun voltage
converter.
Module
|
Description
|
12-24 15W for 12V battery
|
Required for 12VDC AZ-125 Trackers
|
48-24 LVC
|
Steps down 48V from baterry to 36V from array to
24VDC to controller on AZ-125 Tracker
|
PPT-48-5R24
|
Steps down 48V from baterry to 24V for
controller. One required per two AZ-125 or one AZ-225
|
PPT-48-10R24
|
Steps down 48V from baterry to 24V. Will
power four AZ-125 Trackers or three AZ-225 Trackers
|
DR-4524 for pumping
|
Accepts 115 or 370VDC input to power tracker
controller from a high voltage water pumping array. Needs to
be mounted in a raintight box if located outside. Also accepts
115 or 230 volt AC for one AZ-125 Tracker.
|
IDEC PS5R-SF24
|
Accepts 115 or 230 VAC input to power tracker
controller from the AC Grid when no backup battery bank
is present. One required per two AZ-125 trackers or one
AZ-225 trackers or one AZ-225 Tracker. Needs
to be mounted in a raintight box if located outside.
|
Dual-axis option
|
Add automatic elevation tracking to the AZ-125
Tracker. The DA Option is included in the Price of the
Az-225 Trackers
|
Manual contents
|
Exterior switches on the controller cover plate.
Allows for the owner to turn off automatic tracking and then
rotate the tracker east or west and/or up and down. Usefullfor
dumping snow ar to lay the tracker flat in
extremely high winds.
|
Manual control kit
|
Field upgrade for Version 3 controllers.
V3 controllers are "two piece" style and the sensor is
independent of the main control box. Should be installed by an
electrician or other certified personel. |
|
|
|
|
