Quick Mount PV Weatherproof Flashing, Shake Mount 18 x 18 in. Cat. No. QMLC-x-12 Weight 30 lbs

Quick Mount PV is an all-in-one waterproof flashing and mount design to anchor photovoltaic racking systems to a new or existing roof.  The flashing includes an attached standoff block and stainless steel hardware to attach to ProSolar rails (by drilling a hole in the bottom  of the rail) and to AEE SolarSnapRack, Unitac and Direct Power L-feet.  No roof  cutting is required and flashings are sold 12 per box. This is the shake mount. It is shown in a mill finish. It is available in; mill finish, bronze anodized finish, and clear anodized finish. It works with any rack that utilizes an L foot, as well as pro-solar and uni-strut. The flashing is 18" x 18". 5" x 18" is exposed, 10" x 18" is under the next row of shakes, and 3" x 18" is under the second shake above as well as under the tar paper. It is imperative to place the flashing under the tar paper to maintain a waterproof installation. It is simplest to remove the shakes directly above to both; find the rafter, as well as insure the flashing gets under the tar paper, then reset the removed shakes. QMLC-A 12, Shake mounts - mill finish 18" x 18" mount – 12 pack QMLC-C 12, Shake mounts - clear anodized finish 18” x 18” – 12 pack QMLC-B 12, Shake mounts - bronze anodized finish 18” x 18” – 12 pack Colors: QMLC-A-12, Mill Finish : $498.00 QMLC-B-12, Bronze Anodize Finish : $940.00 QMLC-C-12, Clear Anodize Finish : $793.00