Xantrex Power Panel PP-SW5548/S Cat. No. AEE-30.1717 Weight 100 lbs

$5,410.25

The SW Power Panel system comes ready for installation, pre-wired with the following: * SW Series sinewave AC power inverter with high efficiency and bi-directional operation, includes: - 60 amp AC pass-thru power at 120 VAC (/S=Single System) - Adjustable three stage, temperature compensated battery charging * 175 or 250 amp DC disconnect breaker* * 60 amp AC disconnect/bypass breaker in box* * AC and DC wiring in conduit (battery cables not included)* * Powder coated steel back-plate (40" H x 43" W x 1" D) * Battery Temperature Sensor* * Inverter Conduit Box* * Negative/Ground Bonding Block * 500 amp/50 mV shunt (for remote metering) *These items are doubled on /D (Dual=two inverters) systems Options PPO-C40 - C40 DC charge or load controller installed, includes pre-wired 60 amp DC breaker PPO-DVM/C40- Digital meter with LCD display installed on the front of the C40 PPO-BC5-2/0- 5 foot 2/0 AWG ` with ring terminals (battery side only) and flex conduit PPO-BC10-2/0- 10 foot 2/0 AWG battery cable pair with ring terminals (battery side only) and flex conduit PPO-BC5-4/0- 5 foot 4/0 AWG battery cable pair with ring terminals (battery side only) and flex conduit PPO-BC10-4/0- 10 foot 4/0 AWG battery cable pair with ring terminals (battery side only) and flex conduit PPO-BC15-4/0- 15 foot 4/0 AWG battery cable pair with ring terminals (battery side only) and flex conduit GTI Grid Tie Interface- 1 required for each SW inverter (not mounted on Power Panel) Controller: No Controller PPO-C40, C40 DC charge or load controller : $196.08 Option: No Display PPO-DVM/C40, Digital meter with LCD display : $75.24 Option 2: No Battery Cables PPO-BC5-2/0, 5 foot 2/0 AWG : $63.08 PPO-BC10-2/0, 10 foot 2/0 AWG : $100.32 PPO-BC5-4/0 , 5 foot 4/0 AWG : $87.40 PPO-BC10-4/0, 10 foot 4/0 AWG : $138.32 PPO-BC15-4/0, 15 foot 4/0 AWG : $167.20 Option 3: No GTI GTI Grid Tie Interface : $341.24